Optoelectronics, Inc.

PRODUCTS

Spectrum Sweeper
X SWEEPER
Frequency Counters
CUB
M1
M1TCXO
Frequency Recorders
SCOUT
DIGITAL SCOUT
SPECTRUM SCOUT
Counter / Tone Decoder
CD100
Nearfield Receiver
XPLORER
PC Control Interface
OPTOLINX
OSLITE
Wireless Camera Detector
VIDEO SWEEPER
RF Detector
R506
Software
OPTOSUITE PRO / X
Accessories
CABLES/ANTENNAS/FILTERS

Optoelectronics, Inc
160 West Camino Real
#233
Boca Raton, FL 33432
Tel: 954-642-8997
Fax: 954-636-3533
www.optoelectronics.com

Useful for testing two way radios for frequency measurement in the field or using on the bench, the M1 is a full range 50Hz-2.8GHz frequency counter. Using an embedded micro-controller along with our powerful custom OE40 counter IC, the M1 provides advanced features such as our Patented Digital Auto Filter, Digital Auto Capture and Data Storage. The M1 BNC input may be switched from 50OHm to 1 Meg OHm for use with a scope or low pass audio probe for in-circuit measurement of test points and oscillators.

TCXO Option

The M1 has an optional high stability .5ppm TCXO timebase. This is twice as stable over time and temperature than most frequency counters.

PC Download and Datalogging

The M1 is equipped with an PC interface port that allows the unit to be interfaced to our Optolinx for the purpose of real time datalogging and downloading of frequencies in memory. (Optolinx sold separately)

There is now a new Windows based program available from a third party vendor CBT, Inc. The program runs under 95/98/ME/NT4/2000/XP/Vista. Follow the link below to the CBT, Inc web site for more information, including pricing and sample screen shots. www.cbtinc.net

50Hz-2.8GHz frequency range
4-5 hour battery operation
10 digit LCD display
16 segment RF signal strength bargraph
100 internal memories
High speed 250MHz direct count with 1Hz per second resolution
10 gate times from 100 microseconds to 10 seconds
High impedance and 50 Ohm amplifiers for full range 50Hz - 2.8GHz coverage
Includes NiCads and power supply
Switchable 1 Meg Ohm input for use with a scope or low pass audio probe
Use with Optolinx TTL-RS232 convertor box for real time datalogging and download of frequency memories from built-in CI5 port
Standard 1 ppm timebase
Optional .5ppm high accuaracy TCXO timebase

Frequency Range	50Hz - 2.8GHz
Input Impedance	50 Ohm / 1 Meg OHm
Input Coupling	AC
Max Input	+15dBm (50mW)@50 Ohm/50V AC+DC@ 1 MegOhm
Time Base	Frequency: 10MHz, Initial Accuracy: +/- 1ppm (.5PPM TCXO option)
Display	9 Digit .175" character height LCD
Annunciators	Frequency, MHz, Low Batt, Prescale, Filter, Capture, Decimal Point at MHz position
Size	3.7"high x 2.75"wide x 1.2"deep
Cabinet	Stamped Aluminum, black textured
Power	9-12VDC at <100mA from AC90 adapter
Battery	Internal 4 cell AA shrink wrapped NiCad pack

Range	Gate Select	Gate Time	LSD	Sample Display
250MHz	1	.0001S	10kHz	250.00
	2	.001S	1kHz	250.000
	3	.01S	100Hz	250.0000
	4	.1S	10Hz	250.00000
	5	1S	1Hz	250.000000
	6	10S	1Hz	250.0000000
2.8GHz	1	.0064S	10Hz	2800.00
	2	.064S	1Hz	2800.000
	3	.64S	100Hz	2800.0000
	4	.6.4S	10Hz	2800.00000

<10mV @ 10MHZ	<5mV @ 800MHz
<3mV @ 27MHz	<12mV @ 1GHz
<3mV @ 150MHz	<25mV @ 2GHz
<5mV @ 450MHz	<100mV @ 2.8GHz

<40mV @ 50HZ	<30mV @ 20MHz
<30mV @ 1KHz	<40mV @ 30MHz
<30mV @ 10MHz	<60mV @ 40MHz