OPTOELECTRONICS
Unique And Innovative RF Test Equipment
PRODUCTS
* TTL output requires a TTL to RS232 convertor interface to allow the unit to interface to the computer.
* Sensitivity specifications vary depending upon frequency range. The above is only meant as a broad comparison. Refer to the individual product pages for more specific information.
| Cub | M1 | M1TCXO | Scout | Spectrum Scout | Digital Scout | CD100 | Xplorer | X Sweeper | |
| Freq Range | 1MHz-2.8GHz | 50Hz-2.8GHz | 50Hz-2.8GHz | 10MHz-1.4GHz | 10MHz-2.6GHz | 10MHz-2.6GHz | 10MHz-1GHz | 30MHz-2GHz | 30MHz-3GHz |
| Sensitivity * | 5mV | 5mV | 5mV | 5mV | 5mV | 5mV | 5mV | 500uV | 100uV |
| Reaction Tune | X | X | X | X | X | X | |||
| Digital | X | ||||||||
| Analog | X | X | X | X | X | X | X | X | X |
| FCC Data | X | ||||||||
| TTL out * | X | X | X | X | |||||
| RS232 out | X | X | X | X | |||||
| Beeper | X | X | X | ||||||
| Vibrator | X | X | X | ||||||
| Backlight | X | X | X | X | X | ||||
| Signal Bargraph | X | X | X | X | X | X | X | ||
| dBm readout | X | ||||||||
| Audio out | X | X | |||||||
| CTCSS, DCS, LTR, DTMF decode | X | X |