Unique And Innovative RF Test Equipment
When connected to a receiver for Reaction Tune, the Scout can capture a frequency and then tune the receiver to that frequency simultaneously. No more manual tuning of a receiver, no more wondering what you missed, let the Scout do it for you. The Scout can Reaction Tune the ICOM R7000, R7100, R8500, R9000, R10, R20, AOR AR8000, AR8200 Optoelectronics R11, Optoelectronics OptoCom, Radio Shack Pro 2005/6 with the OptoScan456Lite installed, and the Radio Shack Pro 2035/42 with the OptoScan535 installed.
The Scout is shown to the left with the AR8200 and ICR10 respectively.
Our line of antennas include narrow band antennas for specific frequency ranges as well as broad band antennas that cover a wide frequency range.
If you plan to take advantage of the Reaction Tune feature of the Scout we offer a few different cables to work with your specific scanner.
If you intend to use the Scout in a metropolitan area the N100 will help eleiminate those strong signals from the FM stations.
|Input Impedance||50 Ohm|
|Sensitivity||<5mV 30MHz - 900MHz|
|Maximum Input||+15dBM, 50 milliwatts|
|Time Between Measurements||10 milliseconds, all range & gate times|
|Display||10 digit LCD|
|Timebase||10MHz setable to +1ppm|
|RF Signal Strength Bargraph||16 segments, approximately 3dB segments, Relative indication only, No Calibration|
|Size||3.7"high x 2.75" wide x 1.2"deep|
|Battery||Internal 4 cell AA 650mA hour|
|Operating Time||6 hours|
|Power||9VDC 250 mA minimum operating power required, AC90 wall plug adapter supplied|
|Power Connector||2.1mm coax, center positive|
To download frequencies and hits from the internal memory of the Scout to the PC an optional TTL to RS232 interface is required, along with the OptoSuite Pro software program.